MAX6745XKVD3+T

MAX6745XKVD3+T Overview

A total of 5 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. Please refer to power management for 5-TSSOP, SC-70-5, SOT-353 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 1.8V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~85°C TA degrees. During operation, this power management system outputs Push-Pull, Totem Pole. The supervisor's supply current is specified to 10μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6745, which is the base power ics number.

MAX6745XKVD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MAX6745XKVD3+T Applications

There are a lot of Maxim Integrated MAX6745XKVD3+T Voltage Supervisors applications.

• Leakage current detection
• Multi-voltage system
• Battery-powered equipment
• Data storage applications
• Power distribution systems of infant care room
• Detection of phase sequence
• Electrical fire monitoring system
• Medical-specific isolation transformer
• Telecommunications equipment
• Medical-specific insulation monitor