MAX6748KA+T

MAX6748KA+T Overview

This power management consists of 8 mounting terminals on which it can be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SOT-23-8 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~125°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. For this power management, there is an 5μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6748, which is the base power ics number.

MAX6748KA+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current

MAX6748KA+T Applications

There are a lot of Maxim Integrated MAX6748KA+T Voltage Supervisors applications.

• DC stabilized power supply module
• Leakage protection
• Military communications
• Insulation fault location system
• Solar power charger
• Medical-specific insulation monitor
• Leakage current detection
• Consumer electronics
• Household appliances
• DVR