MAX6752KA31+T

MAX6752KA31+T Overview

A total of 8 terminals are used to mount this power management. This power ic is packaged in a way that looks like a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power management is made up of 1 channels which are available in a series format. In this IC management you will find SOT-23-8 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 5V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins are on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The supply current of the power management is 5μA. You can always use MAX6752, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6752KA31+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
5μA operating supply current

MAX6752KA31+T Applications

There are a lot of Maxim Integrated MAX6752KA31+T Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Solar power charger
• Household appliances
• Smart meter
• Display equipment
• Stable power system
• Satellite navigation
• Utility meter
• DVR
• Computer applications