MAX6755UKLD3+T

MAX6755UKLD3+T Overview

Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts at a voltage of 3.6V. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 5 pins on IC management. 5 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Power management recommends the Surface Mount mounting type. The supervisors should be set to the following temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 13μA. A similar IC managements number of the manufacturer can always be found by using MAX6755, the base power ics number.

MAX6755UKLD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current

MAX6755UKLD3+T Applications

There are a lot of Maxim Integrated MAX6755UKLD3+T Voltage Supervisors applications.

• Detection of phase imbalance
• Data storage applications
• Battery-powered equipment
• Microcontroller system
• Embedded computing
• Household appliances
• Refrigeration
• Important electronics for automotive safety
• Digitally controlled LDO regulators circuit
• DC stabilized power supply module