MAX6756UKTD0+T

MAX6756UKTD0+T Overview

This power management consists of 5 mounting terminals on which it can be mounted. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 3.6V. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts power management on the wall. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 5 pins on power management. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. Mounting type Surface Mount is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 13μA. It is always advisable to use MAX6756, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6756UKTD0+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
13μA operating supply current

MAX6756UKTD0+T Applications

There are a lot of Maxim Integrated MAX6756UKTD0+T Voltage Supervisors applications.

• Detection of phase loss
• Precision measurement
• Analog circuit
• Network equipment
• Stable power system
• Urban rail transit weak current power monitoring
• Battery cars
• Functional modules
• Set top box
• Digitally controlled LDO regulators circuit