MAX6801UR31D3+T

MAX6801UR31D3+T Overview

Power management is mounted through 3 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please refer to power management for TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. Using Surface Mount, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 3 pins in it. 3 pins are on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Push-Pull, Totem Pole during operation. For this power management, there is an 5μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6801, which is the base power ics number.

MAX6801UR31D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
5μA operating supply current

MAX6801UR31D3+T Applications

There are a lot of Maxim Integrated MAX6801UR31D3+T Voltage Supervisors applications.

• Cloud computing
• Important electronics for automotive safety
• Insulation fault location system
• Stable power system
• Radar
• Battery cars
• Electric heating appliances
• DVR
• FPGA design
• Refrigeration