MAX6825VUK+

MAX6825VUK+ Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Strip. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When 1.8V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountTemperature setting for the supervisors should be -40°C~125°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. A similar IC managements number of the manufacturer can always be found by using MAX6825, the base power ics number. Voltage supervisor can work with a supply temperature of 30μA at the most.

MAX6825VUK+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V

MAX6825VUK+ Applications

There are a lot of Maxim Integrated MAX6825VUK+ Voltage Supervisors applications.

• Battery cars
• Kitchen appliances
• Consumer electronics
• Low voltage/high power - AI, GPU
• Personal computers
• Set top box
• Insulation fault location system
• Functional modules
• Battery cars
• Power distribution systems of CCU