MAX6843UKD3+T

MAX6843UKD3+T Overview

As you can see, this power management is mounted through 5 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 0.9V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Using Surface Mount, IC management is mounted. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. This power management system has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 550mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 1.8V volts. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a supply current of 8.1μA for the power management. You can always use MAX6843, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6843UKD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
8.1μA operating supply current

MAX6843UKD3+T Applications

There are a lot of Maxim Integrated MAX6843UKD3+T Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Battery cars
• Low voltage/high power - AI, GPU
• Microcontroller system
• Satellite navigation
• Detection of phase sequence
• emergency room
• Military electronics
• Radio
• Kitchen appliances