MAX6844UKD3+T

MAX6844UKD3+T Overview

Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. When a supply voltage of 0.9V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 750mV for this power management. Voltage (Vsup) shouldn't exceed 1.8V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 8.1μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX6844, the base power ics number.

MAX6844UKD3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current

MAX6844UKD3+T Applications

There are a lot of Maxim Integrated MAX6844UKD3+T Voltage Supervisors applications.

• Microprocessor system
• Embedded computing
• Rechargeable batteries
• Digitally controlled LDO regulators circuit
• Cloud computing
• Satellite navigation
• Sensitive sensors
• Medical-specific isolation transformer
• Automotive permanent magnet synchronous motors
• Military communications