MAX6894ETI+

MAX6894ETI+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 28 in total. A Tube package is used to package the power management. For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 4 channels, each of which can be used independently. IC management is packaged as a 28-WFQFN Exposed Pad package. As with other Sequencer products, this IC management also offers a wide range of benefits. The package peak reflow temperature is specified to be 260. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. There is a subcategory called Power Management Circuits for this power management. Power management has a total of 28 pins. Pin count of the power management is 28. There should be a minimum voltage supply (Vsup) of 2.7V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 900μA. In addition, IC management are other features such as [0], to mention only a few. A similar IC managements number of the manufacturer can always be found by using MAX6894, the base power ics number. To operate this power management, you will need at least 3/5V volts of power.

MAX6894ETI+ Features

Sequencer type
Minimum supply voltage of 2.7V
900μA operating supply current

MAX6894ETI+ Applications

There are a lot of Maxim Integrated MAX6894ETI+ Voltage Supervisors applications.

• Set top box
• Power distribution systems of infant care room
• Personal computers
• Household appliances
• Precision measurement
• Embedded computing
• Transformer load monitoring equipment
• Military electronics
• Dash board
• Telecommunications equipment