All Products

MAX690CPA+

5V8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX690CPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 173
  • Description: 5V8 Terminals 8-Pin MAX690 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Pin Count 8
Max Output Current 20mA
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 350μA
Nominal Supply Current 3.5mA
Power Dissipation 400mW
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 4.45mm
Length 9.91mm
Width 7.87mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 6 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 400mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 250kHz
Base Part Number MAX690
Output Push-Pull, Totem Pole

MAX690CPA+ Overview


There are 8 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tube. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. When 5V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Through Hole. There is a subcategory of this power ic known as Power Management Circuits. A total of 8 pins are located on this power management. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 4.75V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. In order to maintain a stable supply current for the power management, 350μA is the recommended value. It is always advisable to use MAX690, the base supervisor number, when searching for similar PMICs from the manufacturer. In order to operate this power management, it requires 5V volts of power. A maximum supply temperature of 10mA can be used. It is generally acceptable to use this IC power with a frequency of 250kHz because it will work well in the vast majority of cases.

MAX690CPA+ Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current

MAX690CPA+ Applications


There are a lot of Maxim Integrated MAX690CPA+ Voltage Supervisors applications.

  • Personal computers
  • Transformer load monitoring equipment
  • Magnetic resonance imaging
  • Automotive power systems
  • Functional modules
  • Cloud computing
  • Important electronics for automotive protection
  • WiFi router
  • Electrical fire monitoring system
  • External alarm