MAX690MJA/883B

MAX690MJA/883B Overview

There are 8 terminals connected to this power management, which makes it easy to mount. There is a Tube-packaging method applied to IC management. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are 8-CDIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Battery Backup Circuit products. Specifies a reflow peak temperature of 245 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Using Through Hole, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. 8 pins are present in total in this power management. This power management has 8 pins. IC management can only work with a supply voltage of 4.75V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Through Hole is the recommended mounting type. Temperature setting for the supervisors should be -55°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. For this power management, there is an 10mA volt supply current. In order to operate this power management, it requires 5V volts of power. Voltage supervisor can work with a supply temperature of 10mA at the most.

MAX690MJA/883B Features

Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current

MAX690MJA/883B Applications

There are a lot of Maxim Integrated MAX690MJA/883B Voltage Supervisors applications.

• DVR
• Leakage protection
• Smartphones
• DC stabilized power supply module
• Unattended substation automation
• Radar
• Magnetic resonance imaging
• Military communications
• Important electronics for automotive protection
• Functional modules