MAX690RCSA+

MAX690RCSA+ Overview

As you can see, this power management is mounted through 8 terminals. Packaging is in the form of a Tube. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. The power management system can be categorized as a Power Management Circuits chip. Power management has a total of 8 pins. 8 pins are on the supervisor. Supply voltage (Vsup) should be at least 4.75V for this power management. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to 0°C~70°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. The supervisor's supply current is specified to 10mA. You can always use MAX690, the base supervisor number, to search for similar PMICs of the manufacturer. It requires 3/5V watts of power to operate this voltage supervisor. At most, voltage supervisor can operate at a supply temperature of 10mA.

MAX690RCSA+ Features

Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current

MAX690RCSA+ Applications

There are a lot of Maxim Integrated MAX690RCSA+ Voltage Supervisors applications.

• Data storage applications
• Leakage protection
• Detection of phase loss
• Multi-voltage system
• Leakage current detection
• Dash board
• Kitchen appliances
• DSP
• Utility meter
• Microprocessor system