All Products

MAX691CPE+

5V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX691CPE+
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 476
  • Description: 5V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 600mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 250kHz
Base Part Number MAX691
Output Push-Pull, Push-Pull
Pin Count 16
Max Output Current 20mA
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 10mA
Nominal Supply Current 3.5mA
Power Dissipation 600mW
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 4.45mm
Length 19.43mm
Width 7.87mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX691CPE+ Overview


Power management is mounted through 16 terminals. In terms of packaging, power management follows the Tube model. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. Please find attached 16-DIP (0.300, 7.62mm) functions for your reference in this IC power. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. During operation, the power ic is supplied with a voltage of 1. The mount is attached to Through Hole. The power management system can be categorized as a Power Management Circuits chip. In total, it has 16 pins on IC management. There are 16 pins on the power managment ic. A voltage (Vsup) that doesn't fall below 4.75V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type is Through Hole. This power management is the recommended temperature range for the supervisors: 0°C~70°C TA. Power management has an output of Push-Pull, Push-Pull during operation. In order to maintain a stable supply current for the power management, 10mA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to MAX691, the base PMIC number. There is a requirement for 5V power to power this power management. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 10mA. In general, this IC power runs at a frequency of 250kHz, which is sufficient for most applications as far as this IC power is concerned.

MAX691CPE+ Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
10mA operating supply current

MAX691CPE+ Applications


There are a lot of Maxim Integrated MAX691CPE+ Voltage Supervisors applications.

  • Military communications
  • Cloud computing
  • Leakage protection
  • Battery cars
  • Household appliances
  • Display equipment
  • Personal computers
  • Electric heating appliances
  • Computer applications
  • Military electronics