All Products

MAX691EWE

5V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 252kHz Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX691EWE
  • Package: 16-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 426
  • Description: 5V16 Terminals 16-Pin MAX691 Voltage supervisor1 Channels 252kHz Min 4.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.295, 7.50mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 1995
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Power Management Circuits
Max Power Dissipation 600mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 5V
Frequency 252kHz
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number MAX691
Output Push-Pull, Push-Pull
Pin Count 16
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 350μA
Nominal Supply Current 2mA
Power Dissipation 600mW
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 35ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 2.35mm
Length 10.5mm
Width 7.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

MAX691EWE Overview


Power management is mounted through 16 terminals. Packaging is in the form of a Tube. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. The purpose of this IC power is to provide you with a reference of 16-SOIC (0.295, 7.50mm Width) functions. There are a lot of similarities between this IC power and other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 240. IC management conducts in a 5V-voltage supply. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 16 pins on the board. This power management system has 16 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.75V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Push-Pull as the output voltage. The supervisor's supply current is specified to 350μA. For similar manage ics search of the manufacturer, you can always refer to MAX691, the base PMIC number. It is necessary to have 5V volts of power in order for this voltage supervisor to operate. At the most, voltage supervisor can work with a supply temperature of 10mA. As a general rule, this IC management operates at a frequency of 252kHz, which is fine for most applications.

MAX691EWE Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current

MAX691EWE Applications


There are a lot of Maxim Integrated MAX691EWE Voltage Supervisors applications.

  • Solar power charger
  • Display equipment
  • Magnetic resonance imaging
  • Computer applications
  • Automotive power systems
  • Military communications
  • DC stabilized power supply module
  • Low voltage/high power - AI, GPU
  • Detection of phase sequence
  • Stable power system