All Products

MAX692ACPA+

5V8 Terminals 8-Pin MAX692 Voltage supervisor1 Channels 250kHz Min 1V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX692ACPA+
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 641
  • Description: 5V8 Terminals 8-Pin MAX692 Voltage supervisor1 Channels 250kHz Min 1V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Number of Pins 8
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination Through Hole
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 727mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 250kHz
Base Part Number MAX692
Output Push-Pull, Totem Pole
Pin Count 8
Max Output Current 20mA
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 1V
Operating Supply Current 350μA
Nominal Supply Current 200μA
Power Dissipation 727mW
Max Supply Current 350μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active Low
Voltage - Threshold 4.4V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.25V
Max Reset Threshold Voltage 4.5V
Undervoltage Threshold 4.25V
Overvoltage Threshold 4.5V
Height 4.45mm
Length 9.91mm
Width 7.87mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX692ACPA+ Overview


A total of 8 terminals are used to mount this power management. In terms of packaging, power management follows the Tube model. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Battery Backup Circuit products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 5V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Through Hole mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 8 pins that are attached to IC management. This power management has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to 0°C~70°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 350μA for the power management. It is always advisable to use MAX692, the base supervisor number, when searching for similar PMICs from the manufacturer. To be able to work, this power management requires 5V volts of power. A maximum supply temperature of 350μA can be used with this power management. As a rule of thumb, voltage supervisor will work well in most cases with a frequency of 250kHz.

MAX692ACPA+ Features


Battery Backup Circuit type
Minimum supply voltage of 1V
350μA operating supply current

MAX692ACPA+ Applications


There are a lot of Maxim Integrated MAX692ACPA+ Voltage Supervisors applications.

  • Radar
  • DVR
  • Electric heating appliances
  • Automotive power systems
  • Functional modules
  • Display equipment
  • Analog circuit
  • Household appliances
  • Automotive permanent magnet synchronous motors
  • Power distribution systems of infant care room