MAX693CWE

MAX693CWE Overview

Power management is mounted through 16 terminals. Packaged in the form of a Tube, power management is easy to use. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. IC management is packaged as a 16-SOIC (0.295, 7.50mm Width) package. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 245 for the package during reflow. The supervisor is always powered by a 5V volt supply. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. There is a subcategory called Power Management Circuits for this power management. The total number of pins on this power management is 16. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 4.5V. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. For this power management, there is an 10mA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX693, the base PMIC number. In order to operate this power management, it requires 5V volts of power. The power management can work with a maximum supply temperature of 10mA.

MAX693CWE Features

Battery Backup Circuit type
Minimum supply voltage of 4.5V
10mA operating supply current

MAX693CWE Applications

There are a lot of Maxim Integrated MAX693CWE Voltage Supervisors applications.

• Smart meter
• FPGA design
• Efficient information transmission
• Insulation fault location system
• Transformer load monitoring equipment
• Dash board
• Military electronics
• Embedded computing
• Rechargeable batteries
• DC stabilized power supply module