All Products

MAX695CPE+

5V16 Terminals 16-Pin MAX695 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX695CPE+
  • Package: 16-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 685
  • Description: 5V16 Terminals 16-Pin MAX695 Voltage supervisor1 Channels 250kHz Min 4.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Mount Through Hole
Mounting Type Through Hole
Package / Case 16-DIP (0.300, 7.62mm)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 1995
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Battery Backup Circuit
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 600mW
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Frequency 250kHz
Base Part Number MAX695
Output Push-Pull, Push-Pull
Pin Count 16
Power Supplies 5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.75V
Operating Supply Current 350μA
Power Dissipation 600mW
Max Supply Current 10mA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.65V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.5V
Max Reset Threshold Voltage 4.75V
Undervoltage Threshold 4.5V
Overvoltage Threshold 4.75V
Height 4.45mm
Length 19.43mm
Width 7.87mm
Radiation Hardening No
REACH SVHC Unknown
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX695CPE+ Overview


This power management consists of 16 mounting terminals on which it can be mounted. Tube-packaging is used. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of 16-DIP (0.300, 7.62mm) functions. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. When 5V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. Through Hole mounts power management on the wall. Power Management Circuits is a subcategory of this PMIC chip. A total of 16 pins are located on this power management. 16 pins make up the power management. It is recommended that Vsup should not be less than 4.75V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: 0°C~70°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Push-Pull. Supplied with a operating current of 350μA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX695, which is the base power ics number. To be able to work, this power management requires 5V volts of power. The maximum supply temperature that PMIC chip can work with is 10mA. As a general rule, this IC management operates at a frequency of 250kHz, which is fine for most applications.

MAX695CPE+ Features


Battery Backup Circuit type
Minimum supply voltage of 4.75V
350μA operating supply current

MAX695CPE+ Applications


There are a lot of Maxim Integrated MAX695CPE+ Voltage Supervisors applications.

  • Power distribution systems of operating room
  • Automotive permanent magnet synchronous motors
  • Electric heating appliances
  • Dash board
  • Leakage protection
  • DC stabilized power supply module
  • Utility meter
  • Household appliances
  • Smartphones
  • Power distribution systems of ICU