MAX704SESA-T

MAX704SESA-T Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Specifies a reflow peak temperature of 245 for the package during reflow. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. 8 pins are on the supervisor. IC management can only work with a supply voltage of 1.1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 50μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX704, the base power ics number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.

MAX704SESA-T Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
50μA operating supply current

MAX704SESA-T Applications

There are a lot of Maxim Integrated MAX704SESA-T Voltage Supervisors applications.

• Utility meter
• Battery cars
• Dash board
• Computer applications
• Microprocessor system
• Embedded computing
• Leakage current detection
• Insulation fault location system
• Network equipment
• Solar power charger