MAX704TESA

MAX704TESA Overview

This power management consists of 8 mounting terminals on which it can be mounted. A Tube package is used to package the power management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this PMIC, you can find 8-SOIC (0.154, 3.90mm Width) functions for your reference. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. Specifies a reflow peak temperature of 245 for the package during reflow. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. The power management system can be categorized as a Power Management Circuits chip. In total, it has 8 pins on IC management. This power management system has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a 350μA supply current present in the power management. For similar manage ics search of the manufacturer, you can always refer to MAX704, the base PMIC number. The voltage supervisor requires a power source of 3.3/5V volts in order to work correctly.

MAX704TESA Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
350μA operating supply current

MAX704TESA Applications

There are a lot of Maxim Integrated MAX704TESA Voltage Supervisors applications.

• Network equipment
• Computer applications
• Detection of phase imbalance
• Consumer electronics
• Battery cars
• Detection of phase loss
• Personal computers
• DVR
• Microprocessor system
• Embedded computing