MAX708CPA+

MAX708CPA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. Packaging is in the form of a Tube. In this IC power you will find 1 functions for you to refer to. This power management is made up of 2 channels which are available in a series format. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Through Hole is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 8 pins on the board. This power management system has 8 pins. Supply voltage (Vsup) should be at least 1V for this power management. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to 0°C~70°C TA degrees. While in operation, this supervisor has a voltage output of Push-Pull, Push-Pull. The supply current of the power management is 350μA. For similar manage ics search of the manufacturer, you can always refer to MAX708, the base PMIC number. A power supply of 5V watts is required for the operation of this power management. At most, voltage supervisor can operate at a supply temperature of 350μA.

MAX708CPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current

MAX708CPA+ Applications

There are a lot of Maxim Integrated MAX708CPA+ Voltage Supervisors applications.

• Radar
• emergency room
• Insulation fault location system
• Refrigeration
• Efficient information transmission
• Important electronics for automotive protection
• Set top box
• Unattended substation automation
• Battery cars
• External alarm