MAX708CUA-TG

MAX708CUA-TG Overview

There are 8 terminals connected to this power management, which makes it easy to mount. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. In a 3.3V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. 8 pins are present on the power management system. It is recommended that Vsup should not be less than 1V for this IC power. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. It is estimated that the voltage supervisor's supply current is 16μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX708, which is the base power ics number.

MAX708CUA-TG Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current

MAX708CUA-TG Applications

There are a lot of ON Semiconductor MAX708CUA-TG Voltage Supervisors applications.

• Radar
• Radio
• WiFi router
• DSP
• Detection of phase loss
• Fire equipment power monitoring system
• Consumer electronics
• Electronics installed in the vehicle
• Military communications
• Leakage protection