MAX709TCPA

MAX709TCPA Overview

There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 245 for the package during reflow. The supervisor is always powered by a 3.3V volt supply. IC management conducts in a 1-voltage supply. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. Mounting type Through Hole is recommended. The supervisors should be set to the following temperature: 0°C~70°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supervisors are also additional features, such as [0] for example, which are worth mentioning. A similar IC managements number of the manufacturer can always be found by using MAX709, the base power ics number. To operate this power management, you will need at least 3.3V volts of power.

MAX709TCPA Features

Simple Reset/Power-On Reset type

MAX709TCPA Applications

There are a lot of Maxim Integrated MAX709TCPA Voltage Supervisors applications.

• Refrigeration
• Solar power charger
• Power communication system
• Multi-voltage system
• Leakage current detection
• Power distribution systems of ICU
• Electric heating appliances
• Rechargeable batteries
• Computer applications
• Important electronics for automotive protection