MAX793REPE+

MAX793REPE+ Overview

There are 16 mounting terminals on the voltage supervisor, each of which has a different function. Packaged in a Tube-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 2 channels that can be found. IC management is packaged as a 16-DIP (0.300, 7.62mm) package. There are many benefits that this IC power shares with other Battery Backup Circuit products as well. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Through Hole-axis. This power ic can be sub-categorized as Power Management Circuits. There are a total of 16 pins on power management. This power management has 16 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Open Drain, Push-Pull during operation. The supply current of the power management is 62μA. A similar IC managements number of the manufacturer can always be found by using MAX793, the base power ics number. It requires 3/5V watts of power to operate this voltage supervisor.

MAX793REPE+ Features

Battery Backup Circuit type
Minimum supply voltage of 1.1V
62μA operating supply current

MAX793REPE+ Applications

There are a lot of Maxim Integrated MAX793REPE+ Voltage Supervisors applications.

• Detection of phase sequence
• emergency room
• Military electronics
• Urban rail transit weak current power monitoring
• FPGA design
• Analog circuit
• Detection of phase loss
• Refrigeration
• DVR
• Utility meter