MAX802SCPA+

MAX802SCPA+ Overview

There are 8 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tube model. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Battery Backup Circuit products. As specified in the package specification, the peak reflow temperature of the package is set at 260. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Through Hole mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. A total of 8 pins are located on this power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management recommends the Through Hole mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. Supplied with a operating current of 50μA, this PMIC is capable of fully function as specified. You can always use MAX802, the base supervisor number, to search for similar PMICs of the manufacturer. In order to operate this power management, it requires 3/5V volts of power.

MAX802SCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
50μA operating supply current

MAX802SCPA+ Applications

There are a lot of Maxim Integrated MAX802SCPA+ Voltage Supervisors applications.

• Multi-voltage system
• Data storage applications
• Battery cars
• Transformer load monitoring equipment
• Radio
• Automotive permanent magnet synchronous motors
• Display equipment
• Functional modules
• Embedded computing
• Power distribution systems of operating room