MAX803SQ308D2T1G

MAX803SQ308D2T1G Overview

This power management consists of 3 mounting terminals on which it can be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-70, SOT-323 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 3.3V-voltage supply. IC management is possible to find a succession of 1 voltages that have been checked. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 3 pins on IC management. Pin count of the power management is 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TJ. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 800nA volt supply current. It is always advisable to use MAX803, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX803SQ308D2T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX803SQ308D2T1G Applications

There are a lot of ON Semiconductor MAX803SQ308D2T1G Voltage Supervisors applications.

• Medical-specific isolation transformer
• Insulation fault location system
• Unattended substation automation
• Detection of phase loss
• Leakage current detection
• Solar power charger
• Utility meter
• Efficient information transmission
• DSP
• Digitally controlled LDO regulators circuit