MAX808LCPA+

MAX808LCPA+ Overview

It is mounted through 8 terminals on the power management. There is a Tube-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a lot of similarities between this IC power and other Battery Backup Circuit products. The package peak reflow temperature is specified to be 260. Manage ics operate at 5V supply voltages. In a 1 supply voltage, the PMIC chip conducts. The mount is attached to Through Hole. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. A Through Hole mounting type is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. There is a 48μA supply current present in the power management. Power management is also possible to add other features such as CMOS RAM WRITE PROTECTION, BATTERY-BACKUP MODE to name a few. You can always use MAX808, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 5V watts is required for the operation of this power management.

MAX808LCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
48μA operating supply current

MAX808LCPA+ Applications

There are a lot of Maxim Integrated MAX808LCPA+ Voltage Supervisors applications.

• Smart meter
• Sensitive sensors
• Functional modules
• Leakage protection
• Stable power system
• Display equipment
• Cloud computing
• Leakage current detection
• Digitally controlled LDO regulators circuit
• Consumer electronics