MAX809SEUR+T

MAX809SEUR+T Overview

There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. Please refer to this PMIC for 1 functions. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of TO-236-3, SC-59, SOT-23-3 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. IC management conducts at a voltage of 3.3V. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. Power managment ic pin count is 3. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 60μA is the recommended value. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.

MAX809SEUR+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
60μA operating supply current

MAX809SEUR+T Applications

There are a lot of Maxim Integrated MAX809SEUR+T Voltage Supervisors applications.

• DVR
• Embedded computing
• Military electronics
• Display equipment
• WiFi router
• Detection of phase imbalance
• Battery cars
• Power communication system
• Important electronics for automotive protection
• Leakage protection