MAX809SQ263T1G

MAX809SQ263T1G Overview

A total of 3 terminals are used to mount this power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts at a voltage of 3.3V. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 3 pins on IC management. There are 3 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TJ. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 800nA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX809, which is the base power ics number.

MAX809SQ263T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX809SQ263T1G Applications

There are a lot of ON Semiconductor MAX809SQ263T1G Voltage Supervisors applications.

• Telecommunications equipment
• DSP
• Satellite navigation
• Automotive power systems
• Cloud computing
• Detection of phase loss
• Personal computers
• Important electronics for automotive safety
• Medical-specific insulation monitor
• Detection of phase imbalance