MAX810SQ120T1G

MAX810SQ120T1G Overview

It is mounted through 3 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. The supervisor is always powered by a 3.3V volt supply. IC management conducts in a 1-voltage supply. Surface Mount mounts power management on the wall. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 3. 3 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~105°C TJ degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 800nA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to MAX810, the base PMIC number.

MAX810SQ120T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX810SQ120T1G Applications

There are a lot of ON Semiconductor MAX810SQ120T1G Voltage Supervisors applications.

• Multi-voltage system
• WiFi router
• Electronics installed in the vehicle
• Rechargeable batteries
• Electrical fire monitoring system
• Stable power system
• Urban rail transit weak current power monitoring
• Network equipment
• Military communications
• Medical-specific isolation transformer