MAX810SQ293D3T1G

MAX810SQ293D3T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-70, SOT-323 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. A supply voltage of 3.3V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 3 pins in it. 3 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~105°C TJ. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 800nA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX810, which is the base power ics number.

MAX810SQ293D3T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX810SQ293D3T1G Applications

There are a lot of ON Semiconductor MAX810SQ293D3T1G Voltage Supervisors applications.

• Fire equipment power monitoring system
• Power distribution systems of CCU
• Battery-powered equipment
• Smart meter
• Analog circuit
• Detection of phase imbalance
• Set top box
• Multi-voltage system
• DC stabilized power supply module
• Medical-specific insulation monitor