All Products

MAX820MCSE+

5V16 Terminals 16-Pin MAX820 Voltage supervisor1 Channels Min 2.75V Max 5.5V


  • Manufacturer: Maxim Integrated
  • Origchip NO: 503-MAX820MCSE+
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 636
  • Description: 5V16 Terminals 16-Pin MAX820 Voltage supervisor1 Channels Min 2.75V Max 5.5V (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 6 Weeks
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Operating Temperature 0°C~70°C TA
Packaging Tube
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation 762mW
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number MAX820
Output Push-Pull, Push-Pull
Pin Count 16
Power Supplies 3/5V
Number of Channels 1
Max Supply Voltage 5.5V
Min Supply Voltage 2.75V
Operating Supply Current 150μA
Max Supply Current 150μA
Adjustable Threshold NO
Watchdog Timer Yes
Reset Active High/Active Low
Voltage - Threshold 4.37V
Number of Voltages Monitored 1
Reset Timeout 140ms Minimum
Min Reset Threshold Voltage 4.25V
Max Reset Threshold Voltage 4.5V
Undervoltage Threshold 4.25V
Overvoltage Threshold 4.5V
Length 9.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MAX820MCSE+ Overview


As you can see, this power management is mounted through 16 terminals. There is a Tube-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 16-SOIC (0.154, 3.90mm Width) functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. There is a subcategory of this power ic known as Power Management Circuits. In total, it has 16 pins on IC management. 16 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 2.75V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Push-Pull of output voltage. There is a 150μA supply current present in the power management. It is always advisable to use MAX820, the base supervisor number, when searching for similar PMICs from the manufacturer. This power management requires 3/5V power to work. At the most, voltage supervisor can work with a supply temperature of 150μA.

MAX820MCSE+ Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 2.75V
150μA operating supply current

MAX820MCSE+ Applications


There are a lot of Maxim Integrated MAX820MCSE+ Voltage Supervisors applications.

  • External alarm
  • Network equipment
  • Detection of phase imbalance
  • Dash board
  • Smart meter
  • Automotive permanent magnet synchronous motors
  • Telecommunications equipment
  • DVR
  • Rechargeable batteries
  • Military communications