MAX8211ESA+

MAX8211ESA+ Overview

It is mounted through 8 terminals on the power management. Tube-packaging is used. Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. To assist you, this PMIC includes 8-SOIC (0.154, 3.90mm Width) functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. A supply voltage of 5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. In total, the power management has 8 pins in it. There are 8 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 2V. Voltage (Vsup) shouldn't exceed 16.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX8211, the base power ics number. To operate this power management, you will need at least 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 15μA.

MAX8211ESA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 2V
15μA operating supply current

MAX8211ESA+ Applications

There are a lot of Maxim Integrated MAX8211ESA+ Voltage Supervisors applications.

• Detection of phase imbalance
• FPGA design
• Dash board
• Battery cars
• Digitally controlled LDO regulators circuit
• Cloud computing
• Stable power system
• Telecommunications equipment
• WiFi router
• Multi-voltage system