MAX823MEUK+T

MAX823MEUK+T Overview

As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts in a 5V-voltage supply. IC management conducts in a 1-voltage supply. The power management is mounted by a Surface Mount-axis. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 1.2V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. Power management has an output of Push-Pull, Totem Pole during operation. As far as the supply current of the power management is concerned, it is 10μA. To find similar IC managements from the manufacturer, you can always search by MAX823. The voltage supervisor requires a power source of 5V volts in order to work correctly.

MAX823MEUK+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
10μA operating supply current

MAX823MEUK+T Applications

There are a lot of Maxim Integrated MAX823MEUK+T Voltage Supervisors applications.

• Utility meter
• Transformer load monitoring equipment
• Satellite navigation
• Microcontroller system
• Electric heating appliances
• Leakage protection
• Computer applications
• Power distribution systems of CCU
• Stable power system
• Battery cars