MAX8901AETA+T

MAX8901AETA+T Overview

Save board space with 8-WFDFN Exposed Pad package. For the design of these LED drivers, 1 outputs are used.Mounting is done according to the Surface Mount method.This emerges as a DC DC Regulator with high efficiency and reliability.At -40°C~85°C TA, the led driver is capable of operating.Backlight provides many benefits.8 terminations are used in its operation.The LED light driver is configured with a base of 0 pins.There are estimated to be 6 segments.The mount is in the way of Surface Mount.Part number MAX8901 represents this LED driver.A maximum supply voltage of 5.5V is acceptable.The output voltage of the device is 26V.There are 8 pins on this device.In addition, it can be classified as Display Drivers according to its characteristics.With 2.6V as the minimal input voltage, it operates.As a result, it runs at a minimal voltage of 2.6V in order to achieve the best efficiency.In the event that the maximum supply current is allowed, it reaches 5.5V.This device is able to provide high efficiency when the maximal supply current should be less than 185μA.24.75mA is the maximum current the load can handle.It's possible for this electronic component to fully function when the switching frequency is maintained at 750kHz.There shouldn't be an increase in output voltage over 25V.

MAX8901AETA+T Features

Available in the 8-WFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 750kHz

MAX8901AETA+T Applications

There are a lot of Maxim Integrated MAX8901AETA+T LED Driver ICs applications.

• Sports Facility Lighting
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• Constant Voltage Power Source for portable equipment
• Refrigeration lighting
• Gallery lighting
• Stage and Studio lighting
• Other Electronic Devices
• LED Lightings for Inspection Devices
• Architectural lighting
• Street lighting