MAX932CPA+

MAX932CPA+ Overview

For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .There is a CMOS, TTL output type for this comparator.We ship the part through Tube .You can find 8 terminals of the comparator.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.The total number of elements is 2 .The device includes 8 pins.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX932 .There is a quiescent current of 6μA in this comparator.Electronic comparator has a Through Hole for mounting on PCB or other boards.The nominal supply current of the device should be 4.5μA for normal use.A current supply greater than 4.5μA may result in the comparator malfunctioning.The normal operation of the system requires 9V operating voltage.

MAX932CPA+ Features

CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 6μA

MAX932CPA+ Applications

There are a lot of Maxim Integrated MAX932CPA+ linear comparators applications.

• Window Comparators, Multivibrators
• RC Timers
• General-Purpose Portable Devices
• Limit Comparators
• Metering Systems
• General Purpose Low Voltage Applications
• Wearable Devices
• Mobile Phones and Tablets
• Window Comparators
• Factory automation & control