MAX932ESA+

MAX932ESA+ Overview

For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, TTL .We ship the part through Tube .There are 8 terminals on the comparator.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.This is a typical comparator of type with Voltage Reference .There are a total of 2 elements in it.There are 8 pins on this board.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 8 pins.If you require more pin-to-pin solutions, search MAX932 for more options.A quiescent current of 6μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normal use of the device should require a nominal supply current of 4.5μA .An excess of current supply over 4.5μA could result in malfunction of the comparator.

MAX932ESA+ Features

CMOS, TTL output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA

MAX932ESA+ Applications

There are a lot of Maxim Integrated MAX932ESA+ linear comparators applications.

• Current and voltage sensing
• Hand-Held Electronics
• Mobile Phones
• Laptop Computers
• Point of load regulators
• System control and monitoring
• Wide Range VCO; MOS Clock Timers
• Window Comparators, Multivibrators
• Self-diagnostics
• Analog front end