MAX970ESD+T

MAX970ESD+T Overview

The product is packaged in 14-SOIC (0.154, 3.90mm Width) for ease of transportation.A comparator with an output type of Open-Drain, Rail-to-Rail is being used.The part will be shipped by Tape & Reel (TR) .The comparator has 14 terminals.The electrical component here belongs to the Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.A total of 4 elements can be found in it.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator consists of 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX970 .The comparator presents a quiescent current of 18μA volts.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 11μA for normal use.A current supply greater than 11μA may result in the comparator malfunctioning.In order to operate the device, 1.5/5.5V power supplies are sufficient.

MAX970ESD+T Features

Open-Drain, Rail-to-Rail output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 18μA

MAX970ESD+T Applications

There are a lot of Maxim Integrated MAX970ESD+T linear comparators applications.

• Zero-Crossing Detectors
• Window Comparators, Multivibrators
• System control and monitoring
• Ultra-Low Power Systems
• Wide Range VCO; MOS Clock Timers
• Handheld Instruments
• Notebooks and PDAs
• Self-diagnostics
• Zero-Crossing Detectors
• Multivibrators and High-Voltage Digital Logic Gates