MAX995EUD+

MAX995EUD+ Overview

In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tube package.You can find 14 terminals of the comparator.Other Comparators like the device play a important role in the industry.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 2.7V .When it comes to types, this comparator is a typical General Purpose .Electronic comparator consists of 4 elements in total.Electronic comparator includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.14 pins are present on the comparator.Try search MAX995 to get more pin-to-pin solutions for your special needs.A quiescent current of 96μA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 320μA .A current supply greater than 320μA may result in the comparator malfunctioning.In order to run the device, there are only +-1.5/+-2.5/3/5V power supplies required.You are allowed to input a maximum current of 1pA into the device.

MAX995EUD+ Features

CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 96μA

MAX995EUD+ Applications

There are a lot of Maxim Integrated MAX995EUD+ linear comparators applications.

• High-Speed Differential Line Receiver
• Wireless Base Stations
• General-Purpose, Low-Voltage Applications
• Notebooks and PDAs
• Mobile Phones and Tablets
• Security Detection Systems
• Automatic Test Equipment
• Portable Battery Monitoring
• Self-diagnostics
• Power management