MC100EP451FAG

MC100EP451FAG Overview

32-LQFPis the way it is packaged. It is included in the package Tray. Currently, the output is configured to use Differential. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at -3V~-5.5Vvolts. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. The 100EPseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 3GHz. In total, there are 1 elements. This process consumes 135mA quiescents. A total of 32 terminations have been made. You can search similar parts based on 100EP451. The D flip flop is powered by a voltage of 3.3V . There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 32 pins. A Positive Edgeclock edge trigger is used in this device. There is a Shift Registersbase part number assigned to the RS flip flops. There are 6bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be above 3V. In order for the device to operate, it requires -4.5V power supplies. 6input lines are available for you to choose from. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V. The high level output current is set to -50mA. 50mA is the low level output current.

MC100EP451FAG Features

Tray package
100EP series
32 pins
6 Bits
-4.5V power supplies

MC100EP451FAG Applications

There are a lot of ON Semiconductor MC100EP451FAG Flip Flops applications.

• Data transfer
• Bus hold
• Registers
• Reduced system switching noise
• Data storage
• Balanced 24 mA output drivers
• Frequency division
• Data Synchronizers
• Cold spare funcion
• Shift registers