MC100EP58DT

MC100EP58DT Overview

Due to the fact that it is provided in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), digital switch allows the board to be compacted.Tube is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -40°C~85°C.When operated with a ±3V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Since they are members of the 100EP series, they can be used in a wide variety of applications.It is designed with 8 terminations as part of its basic configuration.In this case, 3.3V is the voltage supplied to the multiplexer's system.Signal switch has 8 component pins.As the end of conductors, it uses GULL WING.To avoid unnecessary failures, keep the supply voltage at 3V (Vsup).Keeping Vsup at 5.5V will prevent some unnecessary failures.There are 1 outputs designed for the operation of the turn signal switch.The multiplexer provides 2 inputs.Additionally, it improves the characteristics of NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V.

MC100EP58DT Features

Supplied in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
NECL MODE OPERATING RANGE: VCC = 0 V WITH VEE = -3.0 V TO -5.5 V

MC100EP58DT Applications

There are a lot of Rochester Electronics, LLC MC100EP58DT Signal Switches / Multiplexers / Decoders applications.

• Idle motor
• Data transfer
• To select different devices in microprocessor output
• Medium scale TV wall
• High-performance memory-decoding applications
• Combinational circuit
• Logic circuits
• Automatic Monitoring systems
• Enabling block of memory depending on address in memory chips
• GLAN