MC100LVEL51DTR2

MC100LVEL51DTR2 Overview

The flip flop is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Differentialis used as the output. It is configured with a trigger that uses Positive, Negative. There is an electric part mounted in the way of Surface Mount. Powered by a -3V~-3.8Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 100LVEL series. A frequency of 2.8GHzshould not be exceeded by its output. Despite external influences, it consumes 35mAof quiescent current. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 100LVEL51 family contains it. The power source is powered by 3.3V. A part of the electronic system is mounted in the way of Surface Mount. In this device, the clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 1. 3.8Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 3V is necessary for normal operation. To achieve this superior flexibility, 1 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch operates on -3.3V volts. It is also characterized by NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V.

MC100LVEL51DTR2 Features

Tape & Reel (TR) package
100LVEL series
1 Bits
-3.3V power supplies

MC100LVEL51DTR2 Applications

There are a lot of ON Semiconductor MC100LVEL51DTR2 Flip Flops applications.

• Load Control
• CMOS Process
• EMI reduction circuitry
• Cold spare funcion
• Control circuits
• 2 – Bit synchronous counter
• Supports Live Insertion
• Frequency Dividers
• Shift Registers
• Buffer registers