MC10E131FNR2G

MC10E131FNR2G Overview

PLCCis the way it is packaged. It is included in the package Tape & Reel (TR). In total, it contains 1 elements. A total of 28 terminations have been made. It is powered from a supply voltage of 5V. In this case, the D flip flop belongs to the 10Efamily. In this case, the electronic component is mounted in the way of Surface Mount. With its 28pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. This flip flop is designed with 4 Bits. The superior flexibility of this circuit is achieved by using 4 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. A total of -5.2V power supplies are needed to run it. Operating temperatures should be lower than 85°C. It should be higher than 0°Cwhen the system is operating. It is powered by 4.2V as its minimum supply voltage. It supports the maximal supply voltage of 5.7V. This frequency can be achieved 1.4GHz. D FLIP-FLOPis used as the logic IC in this D flip flop. A total of 1 functions are provided by this T flip flop. This device is equipped with a pin count of 28.

MC10E131FNR2G Features

Tape & Reel (TR) package
28 pins
4 Bits
-5.2V power supplies
1 Functions
28 pin count

MC10E131FNR2G Applications

There are a lot of ON Semiconductor MC10E131FNR2G Flip Flops applications.

• Synchronous counter
• Memory
• Digital electronics systems
• EMI reduction circuitry
• Single Down Count-Control Line
• Differential Individual
• Power down protection
• Frequency Dividers
• Shift Registers
• Modulo – n – counter