MC10EL31DTG

MC10EL31DTG Overview

The flip flop is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). It is contained within the Tubepackage. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to -4.2V~-5.7V. Temperature is set to -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 10EL series. Its output frequency should not exceed 2.8GHz Hz. There is 32mA quiescent consumption. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 10EL31. An input voltage of 5Vpowers the D latch. In this case, the electronic component is mounted in the way of Surface Mount. With its 8pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with a number of bits of 1. In this case, the maximum supply voltage (Vsup) reaches 5.7V. The supply voltage (Vsup) should be kept above 4.2V for normal operation. 1 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for RAIL. There are -5.2V power supplies attached to it. In addition to its maximum design flexibility, the output current of the T flip flop is 50mA. In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vis a characteristic of it.

MC10EL31DTG Features

Tube package
10EL series
8 pins
1 Bits
-5.2V power supplies

MC10EL31DTG Applications

There are a lot of ON Semiconductor MC10EL31DTG Flip Flops applications.

• Single Up Count-Control Line
• Functionally equivalent to the MC10/100EL29
• Latch
• Counters
• Storage registers
• Common Clocks
• Set-reset capability
• High Performance Logic for test systems
• Memory
• Computing