MC10EL51DTR2

MC10EL51DTR2 Overview

As a result, it is packaged as 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). As part of the package Tape & Reel (TR), it is embedded. The output it is configured with uses Differential. It is configured with the trigger Positive, Negative. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of -4.2V~-5.7V. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 10ELseries FPGA. You should not exceed 2.8GHzin its output frequency. It consumes 29mA of quiescent current without being affected by external factors. It has been determined that there have been 8 terminations. You can search similar parts based on 10EL51. A voltage of 5V is used to power it. There is an electronic part that is mounted in the way of Surface Mount. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. This flip flop is designed with 1 Bits. It reaches the maximum supply voltage (Vsup) at 5.7V. The supply voltage (Vsup) should be maintained above 4.2V for normal operation. Using 1 circuits, it is highly flexible. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from -5.2V power supplies. Additionally, you may refer to the D latch's additional NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.

MC10EL51DTR2 Features

Tape & Reel (TR) package
10EL series
1 Bits
-5.2V power supplies

MC10EL51DTR2 Applications

There are a lot of ON Semiconductor MC10EL51DTR2 Flip Flops applications.

• ESCC
• Frequency Divider circuits
• Load Control
• Balanced Propagation Delays
• Synchronous counter
• Dynamic threshold performance
• Individual Asynchronous Resets
• Shift registers
• Frequency Dividers
• Automotive