MC10EP451FAG

MC10EP451FAG Overview

The item is packaged in 32-LQFPcases. It is contained within the Traypackage. It is configured with Differentialas an output. In the configuration of the trigger, Positive Edgeis used. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to -3V~-5.5V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. It belongs to the 10EPseries of FPGAs. It should not exceed 3GHzin its output frequency. A total of 1elements are contained within it. T flip flop consumes 125mA quiescent energy. 32terminations have occurred. You can search similar parts based on 10EP451. The D flip flop is powered by a voltage of 3.3V . It belongs to the family of electronic devices known as 10E. In this case, the electronic component is mounted in the way of Surface Mount. Basically, it is designed with a set of 32 pins. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number Shift Registers. There are 6bits in its design. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be maintained above 3V for normal operation. It runs on -5.2Vvolts of power. This input has 6lines. Additionally, there are NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V on the electronic flip flop that can be referred to. The high level output current is set to -50mA. A 50mAvalue is set for low-level output current.

MC10EP451FAG Features

Tray package
10EP series
32 pins
6 Bits
-5.2V power supplies

MC10EP451FAG Applications

There are a lot of ON Semiconductor MC10EP451FAG Flip Flops applications.

• Counters
• ESCC
• Data Synchronizers
• Common Clocks
• Digital electronics systems
• Asynchronous counter
• Buffer registers
• Modulo – n – counter
• Reduced system switching noise
• Load Control