MC10H131L

MC10H131L Overview

16-CDIP (0.300, 7.62mm)is the packaging method. It is contained within the Tubepackage. This output is configured with Differential. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Through Hole. A voltage of -4.9V~-5.46Vis required for its operation. Temperature is set to 0°C~75°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 10H series. This D flip flop should not have a frequency greater than 250MHz. As a result, it consumes 56mA of quiescent current without being affected by external factors. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 10H131 family. Electronic devices of this type belong to the 10Hfamily. A part of the electronic system is mounted in the way of Through Hole. As you can see from the design, it has pins with 16. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. In order to achieve its superior flexibility, 2 circuits are used.

MC10H131L Features

Tube package
10H series
16 pins

MC10H131L Applications

There are a lot of ON Semiconductor MC10H131L Flip Flops applications.

• Memory
• Differential Individual
• Convert a momentary switch to a toggle switch
• Clock pulse
• Data Synchronizers
• Supports Live Insertion
• ATE
• Control circuits
• Event Detectors
• Dynamic threshold performance