MC10H131PG

MC10H131PG Overview

The package is in the form of 16-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of -4.9V~-5.46V. In this case, the operating temperature is 0°C~75°C TA. This logic flip flop is classified as type D-Type. The 10Hseries comprises this type of FPGA. A frequency of 250MHzshould not be exceeded by its output. Despite external influences, it consumes 56mAof quiescent current. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 10H131family includes it. It belongs to the family of electronic devices known as 10H. Through Hole mounts this electronic component. There are 16pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Due to its superior flexibility, it uses 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. With an output current of 50mA, it is possible to design the device in any way you want. 50mAis the output current at high level. In the low level output current setting, 50mAis used.

MC10H131PG Features

Tube package
10H series
16 pins

MC10H131PG Applications

There are a lot of ON Semiconductor MC10H131PG Flip Flops applications.

• Divide a clock signal by 2 or 4
• 2 – Bit synchronous counter
• Synchronous counter
• Counters
• Safety Clamp
• Event Detectors
• Computers
• High Performance Logic for test systems
• Digital electronics systems
• ESD protection