MC10H186PG

MC10H186PG Overview

16-DIP (0.300, 7.62mm)is the way it is packaged. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas the output. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of -4.9V~-5.46Vis used as the supply voltage. It is operating at a temperature of 0°C~75°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 10H series. In order for it to function properly, its output frequency should not exceed 250MHz. D latch consists of 1 elements. There is a consumption of 110mAof quiescent energy. A total of 16terminations have been recorded. If you search by 10H186, you will find similar parts. Electronic devices of this type belong to the 10Hfamily. There is an electronic part mounted in the way of Through Hole. There are 16pins on it. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. Flip flops designed with 6bits are used in this part. 7 circuits are used to achieve its superior flexibility. There are no output lines on the JK flip flop.

MC10H186PG Features

Tube package
10H series
16 pins
6 Bits

MC10H186PG Applications

There are a lot of ON Semiconductor MC10H186PG Flip Flops applications.

• Balanced Propagation Delays
• Bus hold
• QML qualified product
• Balanced 24 mA output drivers
• CMOS Process
• Data storage
• Matched Rise and Fall
• 2 – Bit synchronous counter
• Patented noise
• Clock pulse