MC14076BDR2G

MC14076BDR2G Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 3V~18Vsupply voltage is required for it to operate. Currently, the operating temperature is -55°C~125°C TA. This D latch has the type D-Type. It belongs to the 4000Bseries of FPGAs. In order for it to function properly, its output frequency should not exceed 12MHz. A total of 1 elements are present. As a result, it consumes 20μA quiescent current. There have been 16 terminations. If you search by 4076, you will find similar parts. Power is supplied from a voltage of 5V volts. There is 5pF input capacitance for this T flip flop. Electronic part Surface Mountis mounted in the way. The 16pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. This flip flop is designed with 4 Bits. The supply voltage (Vsup) should be maintained above 3V for normal operation. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. It has 3 output lines to operate. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

MC14076BDR2G Features

Tape & Reel (TR) package
4000B series
16 pins
4 Bits

MC14076BDR2G Applications

There are a lot of ON Semiconductor MC14076BDR2G Flip Flops applications.

• Digital electronics systems
• Balanced 24 mA output drivers
• Data storage
• Buffer registers
• Instrumentation
• Guaranteed simultaneous switching noise level
• Set-reset capability
• Frequency Dividers
• Cold spare funcion
• Consumer